City utility · Washington
Seattle: The owner installs and maintains the private water line from the city union to the building
Seattle Public Utilities' water-service construction page says the property owner installs and maintains the private water line, and any required backflow protection, from the city union to the building's plumbing. The page does not, in the steps we read, assign repair of the pipe on the utility side of that union. One domestic service is the rule per parcel, and a backyard cottage on that parcel is included. SPU does not install or read a private submeter.
Last verified against the official pages listed below. If a number is not on those pages, it is not on this one.
- Property owner
- Utility or city
- Not assigned by the page we read
Open this place in the checker Seattle Public Utilities
The construction page says to call this number to inspect the private water line before it is covered: (206) 684-5800
Seattle's private line starts at the city union
Step 8 of the construction sequence says the property owner is responsible to install and maintain the private water line and any required backflow protection from the city union to the building's plumbing connection. The note says that step can happen before the right-of-way is permanently restored, depending on the schedule. To find out whether backflow protection is required, the page lists (206) 684-3536. After the private line is in, and before it is covered, the page says to call (206) 684-5800 for an inspection, and to meet the Uniform Plumbing Code and the Washington cross-connection rules.
The city union is the fitting the page uses. It does not say 'curb stop,' 'meter outlet,' or 'property line' in that step. We did not translate 'city union' into one of those other words. If your plumber uses a different name, ask SPU whether that fitting is the union this step means.
The steps before that are SPU's connection work in the right-of-way, followed by permanent restoration. Inside Seattle, after SPU finishes its right-of-way work, the financially responsible party does the permanent restoration required by the SDOT street-use permit. Outside the city limits, the page says to ask the local permitting authority. Restoration of the street after SPU's work is not the same thing as owning the private line.
One Seattle water service for the house and the cottage
The page says that, generally, only one domestic water service is allowed per parcel. A backyard cottage, a detached accessory dwelling unit, is not a separate parcel, so it is inside that one service. You may privately submeter on the property to split use between the house and the cottage. SPU does not install or read that submeter.
A new connection, or a change to an existing one, requires the water service application and agreement, and the owner has to accept SPU's rules. Before development, the page says you request a Water, Drainage, and Wastewater Availability Certificate. Meters go in the right-of-way, not in a parking area or a driveway, and the site plan has to show the meter a set distance from the side lot line. Those are installation rules. They support the idea that SPU's meter is in the right-of-way. They are not a sentence that says SPU will repair a leak on the private side of the union.
The direct service area on the page is Seattle plus Shoreline, Burien, Renton, Lake Forest Park, and unincorporated King County. A Seattle mailing address is not the test. The bill and the availability certificate are.
What Seattle's construction page will not price
There is no leak-adjustment cap, no lead-replacement grant, and no point-of-sale certificate in the steps we used. A sale in Seattle may trigger other inspections. This water construction page does not describe one, so the table says so.
There is no price per foot for the private line. The page is a sequence: application, site plan, SPU's work, your private line, inspection before cover, restoration. The quote worksheet is there so the private-line number is the bid you received, not a figure we made up.
If the leak is a gusher in the planting strip, call SPU and ask whether it is on their side of the union. This page equips you to ask that. It does not answer it for a specific address, which is why the street segment on the diagram is marked confirm.
Before you call Seattle Public Utilities
- Confirm the account is in SPU's direct service area, which is wider than the Seattle city limit.
- Treat the private line from the city union to the building, including required backflow protection, as the owner's to install and maintain.
- Call (206) 684-3536 if you need to know whether backflow equipment is required, and (206) 684-5800 to inspect before you cover a new private line.
- Do not expect a second SPU meter for a backyard cottage on the same parcel. A private submeter is yours to read.
- Inside Seattle, plan on the street-use restoration the page assigns after SPU's right-of-way work. Do not treat that restoration note as ownership of the private line.
This page is written for a new connection or a change to an existing service, inside SPU's direct service area. It is the ownership sentence we can cite for the private line. It is not a leak-dispatch page, and it does not say SPU repairs every pipe in the street. Keep the street quote separate until SPU says this break is on its side of the city union. The service area named on the page includes Seattle, Shoreline, Burien, Renton, Lake Forest Park, and unincorporated King County, which is wider than the city limit.
The comparison table puts this split next to the other places we have sourced. The method explains why a city with no page is left out.
Rules that do not match Seattle
- Austin: Austin Water maintains the service through the right-of-way to the meter; the owner maintains past the meter.
- San Jose Water: San Jose Water maintains to the meter outlet coupling; the customer starts at that coupling.
- Winooski: The city keeps the main through the curb stop, unless the only control is a tapping valve.